nVent RAYCHEM ACS-30-EU-PCM2-xx-32A Power & Control Module for ACS-30

Overview

ACS-30-EU-PCM2-xx-32A for distributed power and control in commercial and residential buildings

The RAYCHEM ACS-30-PCM2-xx-32A (PCM) is a modular power distribution and control panel for the ACS-30 control system.

The robust enclosure is approved for non-hazardous installation indoors. The PCM provides connection to the incoming power supply and power distribution & electrical protection to the heat tracing circuits.

The PCM module also provides:

  • Ground fault monitoring
  • Line current monitoring
  • Alarm capability
  • RTD (Resistance Temperature Detector) input capability for each individual heating circuit

Benefits

  • Decentralised PCMs can be located near to the trace heating system, with centralised control at the User Interface terminal (UIT).
  • Pre-installed with electrical safety and circuit protection devices to make installation quick and easy.
  • Control logic built-in to ensure a disconnection for the UIT does not result in loss of service.

Technical Specifications

ACS-30-EU-PCM2-5-32AACS-30-EU-PCM2-10-32AACS-30-EU-PCM2-15-32A
No. of heating Circuits51015
Max. No of Panels to a single UIT522617
Mains Switch1 x 80A, 4-Pole1 x 125A, 4-Pole1 x 160A, 4-Pole
No. of PT100 Sensors inputs51015
Circuit current sensors51015
Panel Dimensions760mm x 760mm x 300mm1000mm x 1000mm x 300mm1000mm x 1400mm x 300mm

* ACS-30 UIT can control and monitor up to 260 individual circuits of trace heating.

ApprovalsCE Approved
ColourRAL7035 (Light Grey)
Enclosure materialPowder coated Metal
External IP ratingIP54
Internal IP RatingIP20
Installation LocationIndoors, non-hazardous areas.
Ambient operating temperature range0-35°C.
Voltage400Vac / 230Vac (configurable), 3L/N/PE. 50-60Hz.
Max load per heating circuit32 Amps
Communication with UIT2 wire RS-485 (shielded, twisted pair) maximum length 1200m (total between all PCMs and UIT.)
Connection and Protection